Billing (Stored Values) (Zmr100Xr Only) - Landis+Gyr E230 User Manual

58/84
6.8

Billing (stored values) (ZMR100xR only)

© Landis+Gyr

Old maximum demand values are added to the cumulative registers

Continual demand register is stored in the Previous MD register

Current MD registers are then cleared
A total of 15 billing (stored values) are available via IEC readout and in
the LCD. Billing periods can be closed/reset automatically by means of a
configured date and time each month or at a specific time on the last
calendar day of the month. Manual closure/reset is also possible by
formatted command and use of the orange MD button (where fitted).
Each billing capture will always contain a date and time stamp and a
billing reset count number. In addition, they may be defined with any
combination of the following parameters (maximum 10):

Energy register channel 1-8, for up to six rates each, plus total
registers

MD register channel 1-4, for up to six rates each, plus total registers

Operating time registers for up to six rates, plus total register

Average power factor

Battery operating time

Terminal cover removal event (special Bulgarian parameter)
Since there are a limited number of segments available in the OBIS
legend, implementation of a 2 second toggle between parts of the OBIS
designation in both auto cycle and manual cycle modes of the displays
for all previous billing parameters, is made (excluding the mandatory
date/time and reset counter parameters). The last completed billing
period is always first in previous billing display list. A worked example is
provided below:
Readout
0.1.0 10 (12-12-01;00:00)
0.1.0 10 (10)
1.8.0 10 (000010.55*kWh)
2.8.0 10 (000002.22*kWh)
15.8.0 10 (000002.16*kvarh)
5.8.0 10 (000002.70*kvarh)
6.8.0 10 (000017.69*kVAh)
7.8.0 10 (000010.55*kWh)
8.8.0 10 (000002.22*kWh)
130.8.0 10 (000002.16*kvarh)
C.8.0 10 (00000033)
C.8.1 10 (00000000)
Example Readout
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
Operation