Landis+Gyr E230 User Manual page 10

10/84
© Landis+Gyr
The meter may solely be installed in a residential environment by
qualified personnel. The meter conforms to IEC 62053, EN 50470 (MID)
in its mechanical specification and is suitable for installation in any
situation that also meets these standards. The meter must be installed
away from powerful sources of electromagnetic interference.
There are no user serviceable parts within the meter and the meter must
be returned to the manufacturer or an authorised partner for repair
and/or maintenance. See sections 7 and 9. There are no permissible
adjustments to meter installation procedure or meter operation outside
those covered by the detailed operational instructions contained within
this document
Any other application of these meters is not considered use for the
intended purpose.
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
Introduction