Energy Efficiency Meter Displays (Zmr100Xc Only); Meter Powered With Zero Energy Being Consumed (Anti-Creep Mode) - Landis+Gyr E230 User Manual

38/84
1st digit
1
2
3
4
6.1.3

Energy efficiency meter displays (ZMR100xC only)

Item
EDL21 Total Active Power
(Summation)
Import Energy Meter
Export Energy Meter
24 Hour Energy
Consumption
1 Week Energy
Consumption
1 Month Energy
Consumption
6.1.4

Meter powered with zero energy being consumed (anti-creep mode)

© Landis+Gyr
Table 2. Determining OBIS code for energy registers
Significance 2nd digit Significance
A+ 2
A- 8
R+ 9
R-
For example: OBIS code 2.8.1 means A-, cumulative energy, tariff 1.
If configured appropriately, the display can list 6 new (Software ≥ K76)
items intended to allow the consumer to easily monitor energy
consumption:
Display
P
E
E-E
1 d
7 d
30 d
The resolution of these 6 displays is 1 W.
30 d and P registers are available in firmware version K76 or newer.
As a built-in privacy feature, if any EDL21 display is shown in
conjunction with no display button activity (presses) for 120 seconds, the
meter exits the EDL displays and returns to the Main Display list.
Example A shows that the meter is powered on all 3 phases (L1-L2-L3),
the internal battery is in maximum charge state (4 bars) (optional
feature) and that the current register being displayed is a kWh register.
In a reverse phase situation (e.g. L1-L3-L2), the phase power segments
will flash.
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
3rd digit
Max demand 1
Cumulative
2
energy
Periodic 3
4
5
6
Content
Total Active Power
(Summation)
Import Energy 1.8.0
Export Energy 2.8.0
Import Energy 1.8.0
over last 24 h
Import Energy 1.8.0
over last week
Import Energy 1.8.0
over last month
Operation
Significance
Tariff 1
Tariff 2
Tariff 3
Tariff 4
Tariff 5
Tariff 6
Remarks
None
Resettable
Resettable
Refresh
every 5 min
Refresh
every 1 hour
Refresh
every 1 hour