Example Displays - Landis+Gyr E230 User Manual

Operation
6.1.2

Example displays


Register
Energy Registers
VRMS Phase L1
VRMS Phase L2
VRMS Phase L3
IRMS Phase L1
IRMS Phase L2
IRMS Phase L3
Power Factor Phase L1
Power Factor Phase L2
Power Factor Phase L3
Power Factor Phase Summation
Mains Frequency
ID1.1 Meter ID (8 characters)
ID1.2 Customer ID_1 (characters 1-8)
ID1.3 Customer ID_2 (characters 9-16)
ID1.4 Manufacturing ID (8 characters)
ID 2.1 Identification Number 2.1
ID 2.2 Identification Number 2.2
IEC Device Address
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual

Maximum Demand (2 channel in ZxR100xC or 4 channel in
ZMR100xR), Previous MD and Cumulative MD

Maximum Demand per rate, current MD and total MD

Previous billing (stored values) (ZMR100xR only)
To further clarify what information can be obtained from the meter's
display, the following are examples of what can appear on the display
and a description of what is being represented. As per above, the meter
display is subject to factory configuration and therefore all options below
may not appear on every meter installation.
For the purpose of this document, a flashing LCD segment will be shown
in red colour and illustrated using this symbol:
.
Energy register indicators can be configured in production to show either
text or OBIS codes to identify the current register.
Table 1. Display text and OBIS code correspondence
Display text OBIS code
Configurable See Table 2
L1 32.7.0
L2 52.7.0
L3 72.7.0
L1 31.7.0
L2 51.7.0
L3 71.7.0
PF1 33.7.0
PF2 53.7.0
PF3 73.7.0
PFT 13.7.0
FR 14.7.0
ID1.1 0.0.0
ID1.2 0.0.1
ID1.3 0.0.2
ID1.4 0.0.3
ID2.1 C.1.0
ID2.2 C.1.1
IEC C.90.1
© Landis+Gyr
35/84