Landis+Gyr E230 User Manual page 3

Revision history
f 02.08.2013
g 14.01.2015
Although the information contained within this document are presented in good faith and believed to be correct, Landis+Gyr (including
its affiliates, agents and employees) disclaim any and all liability for any errors, inaccuracies or incompleteness relating to the product.
Landis+Gyr makes no warranty, representation or guarantee regarding the performance, quality, durability or suitability of the products
for any particular purpose. To the fullest extent permitted by law Landis+Gyr disclaims (1) any and all liability arising out of the use of
the product, (2) any and all liability, including, but without limitation to, special, consequential and indirect damages and losses, and (3)
any and all implied warranties, including, but without limitation to, fitness for purpose and merchantability.
The information contained in this document is strictly confidential and is intended for the addressee only. The unauthorised use,
disclosure, copying, alteration or distribution of this document or the contents thereof is strictly prohibited and may be unlawful.
All product information are subject to change without notice.
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
Section 6.9 MDTP (Manual Date Time Programming) (ZMR100xR
only): MDTP information updated.
Section 6.9.1 Manual setting of date/time/ID: figures redrawn and
reprogramming date and counts added.
Section 6.13 Communication interfaces: RS485 interface added.
Section 6.14.2 Last configuration change identifier: last configuration
change identifier added.
Section 6.15 IEC formatted commands: IEC formatted commands
updated.
Section 7.2.1 Measurement Times: new section added.
Release 2 updates:
New photographs.
Disclaimer updated.
Section 2.4.2 RTC (Real Time Clock) accuracy (ZMR100xR only)
updated.
Section Starting values deleted.
Section 2.4.6 Power consumption updated.
Section 2.5 Data readout updated.
Section 4.1.1 Meter construction updated.
Section 4.1.5 Field of application updated.
Section 5.6.1 Installation mode updated.
Section 6.1 Customer display updated.
Section 6.1.1 Display cycle options updated.
Section 6.1.2 Example displays updated.
Section 6.1.3 Energy efficiency meter displays (ZMR100xC only)
updated.
Section Import and export energy (ZMR100xC only) deleted.
Section 1-day and 7-day consumption registers (ZMR100xC only)
deleted.
Section 6.1.6 Rate registers updated.
Section 6.3 Push button operation updated.
Section 6.4.1 Reverse energy detection (RED) updated.
Section 6.4.2 Tamper event log (ZMR100xR only) updated.
Section 6.4.5 DC magnetic field intrusion updated.
Section 6.4.6 Alert notification updated.
Section 6.6 ToU (Time-of-Use) tables (ZMR100xR only) updated.
Section 6.6.1 Tariff control (ZMR100xR only) updated.
Section 6.6.2 Load control (ZMR100xR only) updated.
Section 6.7 Maximum demand updated.
Section 6.7.4 Reset of maximum demand updated.
Section 6.8 Billing (stored values) (ZMR100xR only) updated.
Section 6.9.1 Manual setting of date/time/ID updated.
Section 6.11.1 Relay control (ZMR100xR only) updated.
Section 6.13 Communication interfaces updated.
Section 6.15 IEC formatted commands updated.
Section 6.4.2 Tamper event log (ZMR100xR only) updated.
Section 8 Error handling added.
3/84
© Landis+Gyr