Further Notes; Warning Symbols And Type Plates - Otto Bock Dino 3 Instructions For Use Manual

Safety instructions
Be careful with your fingers when using the mobility base with seating shell or during adjustment and assembly
works (risk of injuries).
Be sure to re-tighten the screws after all adjustments.
Maximum load including seating shell is 120 kg.
Your hands may become warm due to slowing down from high speed or on longer slopes. This is especially
true if the push rings are aluminum.
When using your mobility base with seating shell outdoors, wear leather gloves. Gloves provide you with a
better grip and protect your fingers from dirt and hot metal.
Using your Ottobock product as a seat in vehicles for transporting persons with reduced mobility
Passengers should use the seats and vehicle restraint systems already installed in the vehicle whenever
possible while travelling. This is the only way to ensure optimum protection of passengers in the event of an
accident.
Your Ottobock product Dino 3 can be used as a seat in a vehicle for transporting persons with reduced mo-
bility with the use of the safety elements offered by Ottobock and appropriate restraint systems. For further
information please refer to our instructions for use „Using Your Wheelchair/Seating Shell Mobility Base or
Buggy as a Seat for Transportation in a Wheelchair Accessible Vehicle", order number 646D158.
While installing add-on drives on the product is generally not permitted, it can be reviewed by our Custom
Fabrication department on request.
Serious injuries due to exceeding the service life
• Using the product beyond the specified expected service life (see the section „Service life") leads to incre-
ased residual risk and should only take place subject to the due diligence and deliberations of qualified
personnel.
• If the service life is reached, the user or a responsible attendant should contact the qualified personnel
who fitted the product or the manufacturer's servicing department (see inside rear cover or back page for
address). Here the user can obtain information about known risks and the current options for refurbishing
the product.

3.1. Further notes

Attention!
Even in the event of compliance with all applicable guidelines and standards, it is possible that alarm
systems (e.g., in department stores) may respond to your product. Should this happen, remove your
product from the area where the alarm was triggered.

3.2. Warning symbols and type plates

Label / nameplate
24 | Ottobock
A Type designation
B Manufacturer's article number
C Maximum load capacity (see Section „Technical Data")
D Manufacturer / address / country of manufacture
E Serial number
F Manufacturing date
G European Article Number / International Article Number
H Read the Instructions for Use prior to using the product.
I CE marking – product safety in conformity with the EU Direc-
tives
Explanation
Dino 3