Further Notes; Warning Symbols And Type Plates - Otto Bock Motus CV Instructions For Use Manual

Safety instructions

2.3 Further notes

INFORMATION
Even in the event of compliance with all applicable guidelines and standards, it is possible that alarm
systems may respond to your product. Should this happen, remove your product from the area where
the alarm was triggered.

2.4 Warning symbols and type plates

Label/Type plate
50 | Ottobock
Explanation
A Type designation
B Manufacturer's article number
C Maximum load capacity
D Manufacturer information/address/country of
manufacture
E Serial number
F International article number
G Read the instructions for use before using the
product.
H CE marking – product safety
in conformity with EU directives
Attention!
The rear wheels are positioned according to your
instructions. Before putting the wheelchair into op-
eration, the pre-adjusted position must be checked
for tilting safety and proper functioning by the user
supported safely by the specialist staff.
Anchoring point/securing point for securing the
wheelchair in wheelchair accessible vehicles.
Motus CV/CS