(8) Inputting the return/end code
►Press
.
(Data on feed data to the home position and the end code
will be created.)
Caution
The work holder will automatically return
to the home position. Take care when the needle is
lowered, etc.
►A prompt for home position return will appear. Press
Caution
If the needle is not at the UP position, it may lower
once and then return to the UP position.
(9) Select a saving method.
►After selecting the saving method, press
(Refer to page [5]-6.)
►Return to the standard screen.
(10) Confirming the data
►Confirm the data. Press the jog icons (
sewing machine movement can be confirmed.
(Even if the data input has not been completed, if the data
input last has been set, the movement can be confirmed in
the same manner.)
►If the data must be modified, refer to "section [11]".
The needle will rise to the UP position.
.
icon.
) so the
[7]‐6