Entering The Conversion Mode; Quitting The Conversion Mode; Confirming On The Image Screen (For The Conversion Mode) - Mitsubishi Electric PLK-J Series Technical Manual

2. Entering the conversion mode

►Press
enter the conversion mode.

3. Quitting the conversion mode

►After converting the data, press
conversion mode.
(When
will be undone.)

4. Confirming on the image screen (for the conversion mode)

(Refer to the section "5.Confirming on the image screen" for the modification mode for explanations
common for the modification mode and conversion mode.) page [11]-4
■Scaling, rotation
: Indicates the home position.
(Common for all Image screens.)
: Indicates the center position.
and on the Standard screen to
is pressed, the conversions executed last
to quit the
[13] ‐ ２