Traceability - Mitsubishi Electric PLK-J Series Technical Manual

< Continuation of [Pattern ] >
Function
PKY
It release or not release
the selected pattern data
after sewing machine
rotation.
ASR
Setting of the unit of the
time that is stopped by
ASRT code.
HPW
Setting presser foot height
in pattern data
DTPW
Setting digital tension
position in pattern data

23. Traceability

Function
ZDS1
Material detect speed 1
initial
ZDS2
Material detect speed 2
initial
ZDSQ
Material detect pressure
setting initial
ZDST
Material detect judgment
time initial
ZDSL
Material detect
judgment range initial
Unit Setting range
Setting of whether to release the selected sewing pattern data after sewing machine rotation,
when the sewing pattern data selection by serial communication is effective.
OF
-
ON
Sets the unit of the time from stop by the ASRT code during sewing machine rotation to
sewing again.
1000
- 500
200
Sets USE/NOT USE of PF height in pattern data
OF
-
ON
Sets USE/NOT USE of digital tension value in pattern data
OF
-
ON
Unit Setting range
- 1 to 100
- 10 to 100
x0.1% 150 to 1000
ms 50 to 1000
x0.1
0 to 100
mm
[19] - 22
Specification
When the sewing pattern data selection by barcode reader is
effective, the selected sewing pattern data is not released after
sewing machine rotation.
When the sewing pattern data selection by barcode reader is
effective, the selected sewing pattern data is released after
sewing machine rotation. Please select the sewing pattern data
by serial communication again. This function is valid when
(PT1) = ON.
The unit of the time that is stopped by the ASRT code is set to
1 sec(1000msec).
The unit of the time that is stopped by the ASRT code is set to
0.5 sec(500msec).
The unit of the time that is stopped by the ASRT code is set to
0.2 sec(200msec).
Not use PF height in pattern data
(Use PF height in machine)
Use PF height in pattern data
(Not use PF height in machine)
Not use digital tension value in pattern data.
(Use digital tension value in machine)
Use digital tension value in pattern data.
(Not use digital tension value in machine)
Specification
Sets speed of the position to switch speed when material
detect
Sets speed of the detection position when material detect
Sets the material detect torque setting
Sets the material detect judgment time
Sets the material detect judgment range