Mitsubishi Electric PLK-J Series Technical Manual page 45

(7) Inputting the return/end code
►Press
.
(Data on feed data to the home position and the end code
will be created.)
Caution
return to the home position. Take care when the
needle is lowered, etc.
►A prompt for home position return will appear. Press
Caution
may lower once and then return to the UP position.
(9) Select a saving method.
►After selecting the saving method, press
(Refer to page [5]-6.)
►Return to the standard screen.
(10) Confirming the data
►Confirm the data. Press the jog icons (
the sewing machine movement can be confirmed. (Even
if the data input has not been completed, if the data input
last has been set, the movement can be confirmed in
the same manner.)
►If the data must be modified, refer to "section [11]".
The work holder will automatically
The needle will rise to the UP position. If the needle is not at the UP position, it
[7]‐１０
.
icon.
) so