Broken Line Input - Mitsubishi Electric PLK-J Series Technical Manual

5. Broken line input

Operation points
▪ Designate broken line input
▪ Up to 300 points can be input (A broken line connecting the current position and input points is created.)
[Example] The following type of sewing data will be created.
Operation details
(1) Inputting feed data to A point
►Press
After making the various settings on the Data Setting
Input screen, the Arrow Input screen will open.
(Refer to page [6]-4)
►Check that the code is set to FEED. If different code is
set, press
►Press the arrow icons and move to the A point.
(Feed data to A point.)
(2) Setting feed data to A point
►The movement amount can be confirmed.
►Press
(Data on feed data to point A will be created.)
►To change the stitching type to "Broken line input", press
the input method setting icon.
(In this case, the
(3) Designating broken line input
►Press
►Press
►The system will return to the arrow input screen.
and on the Standard screen.
and set the code to FEED.
to set the data.
icon.)
.
and set the data.
[7]‐１５