Digital Tension - Mitsubishi Electric PLK-J Series Technical Manual

< Continuation of [Communication ] >
Function
UBCV
Sets ON/OFF of valid for
USB barcode reader
UBCT
Sets the timing of reading
the barcode for USB
barcode reader
UBDI
Sets ON/OFF of valid for
recording information data
for USB barcode reader
PTOW
Setting valid of overwrite
the current pattern data
by USB communication

19. Digital tension

Function
DTSN
Sets ON/OFF of valid for
Digital tension
DTST
Sets value of the digital
tension code default
DTS1
Sets value of the digital
tension code 1
DTS2
Sets value of the digital
tension code 2
DTMX
Digital tension maximum
position (100.0)
DTMN
Digital tension zero
position (0.0)
DTA0
Digital tension direction
0 deg
DTA1
Digital tension direction
45 deg
Unit Setting range
Valid/Invalid USB barcode reader
OF
-
ON
Reading timing of the USB bar cord reader
OF
-
ON
Valid/Invalid the ID and pattern read data accumulation of USB barcode reader
OF
-
ON
Sets valid/invalid of overwrite the current pattern data by USB communication
OF
-
ON
Unit Setting range
Select the digital tension function mode
OF
PT
-
AT
ME
- 0.5 to 100.0
- 0.5 to 100.0
- 0.5 to 100.0
DTMN. to
pulse
16000
0. to DTMX
pulse
10 to 300
%
10 to 300
%
[19] - 19
Specification
Invalid USB barcode reader
Valid USB barcode reader
Reading the pattern number by customize signal (BCDR) on
timing
Reading the pattern number by clamp on timing
Invalid the ID and pattern read data accumulation of USB
barcode reader
Valid the ID and pattern read data accumulation of USB
barcode reader
Sets the invalid of overwrite the current pattern data by USB
communication
Sets the valid of overwrite the current pattern data by USB
communication
Specification
Digital tension is possible to operate by manual. Tension value
is displayed on the panel.
Digital tension operate automatically by the sewing data. It can
not be operated manually.
Digital tension operate automatically by the sewing direction. It
can not be operated manually.
Memorize the position of digital tension
Digital tension code default setting value
Digital tension code 1 setting value
Digital tension code 2 setting value
Sets the maximum position (100.0) of digital tension
Sets the zero position (0.0) of digital tension
Sets the digital tension value of the 0 degree sewing direction
Sets the digital tension value of the 45 degree sewing direction