(4) Setting the speed and confirming execution
►Set the new speed (MD1).
►Press
.
(The stitching speed will be modified.)
(5) Confirming the modifications
►Quit the modification mode. Press
saving mode screen. It return to the standard screen after
saving the data.
(When
is pressed, the modifications executed last
will be undone.)
Note
As the speed and stitch length can not be confirmed on the standard screen,
it is recommended to check the part to be changed on the image display screen in (4).
As another way to confirm, the status is checked by
switching over from the pattern input screen to the arrow
input screen as existing data and moving the tracks of
data with JOG.
to change to the
JOG
[11]‐45