Mitsubishi Electric PLK-J Series Technical Manual page 180

■Example of setting
(1) Selection of mode
►When the icon for the mode to be set is pressed, the "Setting
Selection panel" will open.
(In this example, HALT is pressed.)
(2) Selection of function
►When the icon for the function to be set is pressed, the
"Setting Value Change panel" will open.
(In this example, STF is pressed.)
(3) Changing setting value
►After changing setting value (selecting status icon)(Here,
pressing ST ), press
Note To show all explanation of these status icon, press
.
(4) Checking function setting change
►Return [Setting selection] window.
After check setting value press
to confirm setting.
.
[16] - ２