Erasing - Mitsubishi Electric PLK-J Series Technical Manual

4. Erasing

Operation points
·Select "Read mode" from the menu.
·Select the target (internal memory/USB memory).
·Select the data, and execute erasing.
Operation details
(1) Selecting data erase
►Press
►Press
Note Data erasing excluding the start position cannot
be executed. Erase pattern data after home returning.
►Press (Select) the number of the data to be erased, and
press .
►To erase from USB memory, press
Note USB memory must be inserted to switch target to
USB memory.
(2) Confirmation of the erase target
►An erase confirmation message will be displayed.
►A message confirming that you erase the data appears. If
you cancel the erase operation, press the
you execute the erase operation, press the
message indicating that erasing is in progress appears,
and then the Standard screen reappears.
(3)
Data erase complete
►
Erase completed (0801 is erased)
[ Caution ] When the target is the USB memory, do not remove the USB memory during erasing.
(Doing so may result in data damage.)
on the standard screen, and open the menu mode.
.
or .
icon. If
icon. A
[5]‐８