Mitsubishi Electric PLK-J Series Technical Manual page 22

Note
When the pattern data number is already known, it is possible to read by specifying the
number directly by the following operations.
(Following operation is limited to reading from an internal memory.)
Reading [Direct reading mode]
Operation details
(1) Selects pattern data read button
Note Data reading excluding the start position cannot be
executed. Read pattern data after home returning.
►Press
, then menu screen is displayed.
►Press
(2) Selects direct pattern number selection
Note Direct pattern number selection is possible only to the
data stored into the internal memory.
►Press direct pattern number button
(3) Specifies pattern data number 1
(example．Case of reading number [0861]. )
► Press number button [08].
Note When "8" is first entered, the 8000 series is
displayed.
► Data in the internal memory are displayed by the lower ten
icons.
It is displayed from an input small data number to begin with "08" in turn.
.
.
[5]‐４