Mitsubishi Electric PLK-J Series Technical Manual page 113

Designating the modification position without using jog icons
■
(Handy for newly creating data.)
[Example] The E point and F point in the following type of stitching data will be deleted, the G point will be
newly created, and the feed data will be modified.
Operation details
(1) Selecting block modification
►Enter the modification mode. (Refer to Page [11]-2)
►Press Stitch Data Change
Block Modify
►Press
to open the next screen.
(2) Selecting the input type
►Press Feed data
►Press
to set the data.
(3) Determining the block modification range (start point)
►Using Jog
(Home position)
►Press
.
and
.
.
determine the start point position.
[11]‐３７