Mitsubishi Electric PLK-J Series Technical Manual page 236

CODE
M-199 DELETES SEWING DATA IN USB MEDIUM
M-201 CORRESPONDING DATA DOES NOT EXIST IN USB MEDIUM
M-202 READING FILE INFORMATION OF THE USB MEDIUM
M-203 USB MEDIUM IS CONNECTED
M-204 READING COMPLETE
M-205 WRITING COMPLETE
M-206 TERMINATE USB MEDIUM PROCESSING
M-207 USB MEDIUM OVERCURRENT
M-208 USB WAS DISCONNECTED
M-209 INTERNAL MEMORY DEFECT
M-210 SAVED FILE NUMBER IS OVER LIMIT
M-211 SPECIFIED SEWING DATA DOES NOT EXIST IN THE MEMORY
M-212 MEMORY FORMATTING...
FORMATTING INTERNAL MEMORY...
M-213
M-214 THERE IS NO NUMBER THAT HAS BECOME EMPTY IN MEMORY
WRITING SEWING DATA INTO THE INTERNAL MEMORY...
M-215
DELETING SEWING DATA IN THE INTERNAL MEMORY...
M-216
READING SEWING DATA FROM THE INTERNAL MEMORY...
M-217
M-218 DELETES SEWING DATA IN THE INTERNAL MEMORY
M-219 OVERWRITES SEWING DATA IN THE INTERNAL MEMORY
M-220 INSUFFICIENT EMPTY AREA IN THE INTERNAL MEMORY
M-221 INTERNAL MEMORY IS DAMAGED
M-222 PATTERN DATA CAN NOT BE DELETED
M-223 FORMATS INTERNAL MEMORY
M-224 OPTIMIZES INTERNAL MEMORY
M-226 COMBINATION DATA CAN NOT BE CREATED
M-227 CAN NOT CHANGE PATTERN DATA NUMBER
M-228 OUT OF AREA LIMIT
M-229 WRONG PATTERN DATA WAS SET
M-230 CAN NOT READ
MESSAGE SUB-MESSAGE
ARE YOU SURE? Yes: ENTER ICON
PLEASE CHANGE USB MEDIUM
PLEASE WAIT FOR A WHILE
PLEASE DETACH USB MEDIUM
PLEASE DETACH USB MEDIUM
PLEASE DETACH USB MEDIUM
PLEASE DETACH USB MEDIUM
PLEASE CHANGE USB MEDIUM
SWITCH TO INTERNAL MEMORY
INTERNAL MEMORY WILL BE FORMATTED. PRESS ENTER ICON
PLEASE ERASE UNUSED DATA
CHECK FILE NAME AND PATTERN DATA NUMBER
PLEASE WAIT FOR A WHILE
PLEASE DELETE UNNECESSARY DATA
PLEASE WAIT FOR A WHILE
PLEASE WAIT FOR A WHILE
PLEASE WAIT FOR A WHILE
ARE YOU SURE? Yes: ENTER ICON
ARE YOU SURE? Yes: ENTER ICON
PLEASE ERASE UNUSED PATTERN DATA, AND OPTIMIZE AN INTERNAL MEMORY.
INTERNAL MEMORY IS DEFECTIVE. PLEASE REINSTALL SYSTEM
CURRENT PATTERN DATA CAN NOT BE ERASED
ARE YOU SURE? Yes: ENTER ICON
ARE YOU SURE? Yes: ENTER ICON (SEWING DATA WILL NOT BE ERASED)
No: × ICON
PATTERN DATA WHICH CONTAINS SECOND HOME POSITION CAN NOT BE USED
FOR COMBINATION.
CAN NOT CHANGE TO PATTERN DATA NUMBER WHICH IS USING.
PLEASE CHANGE PATTERN DATA
PLEASE CHANGE PATTERN DATA
PRESS HOME ICON
No: × ICON
-
No: × ICON
No: × ICON
No: × ICON