Mitsubishi Electric PLK-J Series Technical Manual page 114

(4) Determining the block modification range
►Using Jog
position) and end point (A point).
►Press Jog Validity
►Press
.
(5) Moving and determining the modification position
►Using the arrow icons, modify the position.
(Move to G point in this example.)
►Press
.
►If there are several positions to be modified, repeat step 5.
(The number of input points will increase.)
►When all modifications have been made,
press again.
(6) Confirming the data creation
►Press
.
(The block position will be modified.)
Caution
return to the start point. Take care when the needle is
lowered, etc.
(7) Confirming the modified data
►Quit the modification mode. Press
saving mode screen. It return to the standard screen after
saving the data.
(When is pressed, the modifications executed last
will be undone.)
determine the start point (Home
.
The work holder will automatically
to change to the
[11]‐３８