Modifying A Block 4 (Changing The Feed Data) - Mitsubishi Electric PLK-J Series Technical Manual

18. Modifying a block 4 (Changing the feed data)

Methods for designating the modification position with the jog icons.
(This is handy when using the modification origin data as a reference.)
[Example] The E point and F point in the following type of data are each modified to the E' point
and F' point.
Operation details
(1) Selecting block modification
►Enter the modification mode. (Refer to Page [11]-2)
►Press Stitch Data Change
Block Modify
►Press
(2) Selecting the input type
►Press Feed data
►Press
(3) Determining the block modification range (start point)
►Using Jog
(Home position)
►Press
.
and
.
to open the next screen.
.
to set the data.
determine the start point position.
[11]‐３４
→