Symmetrical - Mitsubishi Electric PLK-J Series Technical Manual

9. Symmetrical

[Example] The left state of the following type of stitching data will be converted into a right state.
Operation details
(1) Selecting symmetrical
►Enter the conversion mode.
►Press Symmetrical
►Press
.
(2) Setting symmetrical method, etc., and executing
►Clearing symmetrical origin data
: Delete Symmetrical Origin Data
: Keep Symmetrical Origin Data
(Press "Delete" for this example.)
When "Keep symmetrical original data" is selected,
Note
"material stel level" setting is not reflected to
symmetrical data.
►Method
: X Symmetrical Data Creation
: Y Symmetrical Data Creation
: XY Symmetrical Data Creation
(Press "X Symmetrical Data Creation" for this example.)
►Press
.
(3) Confirming execution of conversion
►Quit the conversion mode.
Press
It return to the standard screen after saving the data.
(When
be undone.)
→
.
to change to the saving mode screen.
is pressed, the conversion executed last will
[13] ‐ １２