Conversion To Single Solenoid Or Double Solenoid Valve Locations - Festo CPA VI Series Manual

5. Maintenance and conversion
5.4.4 Conversion to single solenoid or double solenoid valve
locations
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
EV1: manifold block for single solenoid valve location
EV2: manifold block for double solenoid valve location
Fig. 5/7: Identification of the manifold blocks
5-22
The valves (single or double solenoid) which can be
fitted into a valve location are determined by the man-
ifold block.
In order to convert a valve location to single or double
solenoid, you must replace the manifold block on the
appropriate sub-base.
For conversion you will require:
– manifold block CPA..-EV1 for a single solenoid valve
location
– manifold block CPA..-EV2 for a double solenoid valve
location
By means of the identification on the manifold block,
you can ascertain which manifold blocks are fitted on
your CPA valve terminal (see diagram).
AAAA
AAAA
AAAA AAAA
AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA
AAAA AAAA AAAA AA AA AAAA AAAA
AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AA AA AAAA
AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AA AA
AAAA AAAA AAAA AA AAAA AAAA
AAAA AAAA AAAA AA AA AAAA AAAA AA AA
AAAA AAAA AAAA AAAA AAAA AAAA A
AAAA AA AAAA AAAA A
AAAA AA AAAA AAAA A A
AAAA AA AA AAAA AAAA
AAAA AAAA AAAA A A
AAAA AAAA
AAAA AAAA A
AAAA A
AAAA AAAA AA AA
AAAA AAAA
AAAA AAAA AA AA
AAAA AAAA
AAAA AAAA AA AA
AAAA AAA AAAA
AAAA AAA AAAA AAAA A A AA AA
AAAA AAA AAAA AAAA AAAA
AAA AAAA A A AAAA
AAA AAAA AAAA
AAA AAAA A A AAAA
AAA AAAA AAAA
AAAA A A AAAA
AAAA AAAA
AAAA
CPA... 9808A