Festo CPA VI Series Manual page 52

3. Installation
3-18
Connect the valve solenoid coils as follows:
1. Place the intermediate plug on the terminal lug of
the appropriate pilot solenoid for current reduction.
2. Place the socket on the terminal lug of the appropri-
ate pilot solenoid. The socket can be turned 180
Make sure that the centring bolt fits between the ter-
minal lugs and into the hole in the socket (see diag-
ram).
3. Tighten the socket with the locking screw with a
torque of 0.2 Nm.
Intermediate plug with current reduction
Connecting socket
Fig. 3/10: Fitting the individual connecting sockets
AAAA AAAA
AAAA AAAA
AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA AA AAAA AAA
AAAA AAAA AA AA AAAA AAA
AAAA AAAA AAA AAAA
AAAA AAAA AAAA AA AA AAAA AA AA AAA
AAAA AAAA AAAA AAAA AAA
AAAA AAAA AAAA AAAA AA AA AAAA AA AA AAA
AAAA AAAA AAAA AAAA AAA
AAAA AAAA AA AAAA AAAA AAAA AA AA AAA
AAAA AAAA AA AA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA AAAA AA AA
AAAA AAAA AA AA AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA
AAAA AA AA AAAA AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA AAAA
AAAA AAAA
AAAA AAAA
AAAA A A
AAAA
AAAA A A
AAAA
AAAA A A
AAAA
AAAA A A
AAAA AAAA AAAA
AAAA AAAA
AAAA AAAA
AAAA AAAA
AAAA AAAA
AAAA AAAA
AAAA AAAA
AAAA AAAA
CPA... 9808A
o
.