Outputs And Valve Locations - Festo VIFB-02- Series Manual

VIFB1 – 02
4-40
> IFB1-02_BES_V_018474g1_1996-04N - Restored Document - 2011-12-15 <
4. Installation

Outputs and valve locations

The outputs of the valves correspond to the val-
ve solenoid coils. They can only be used in the
form intended. In general, the following applies:
• not short-circuit protected
• two outputs per valve location
• with unilaterally-operated valves the output
with the even bit number is used. The other
output cannot be used for other purposes.
9604