Table of Contents
Advertisement
A. Technical appendix
A.2 Technical specifications
General
Permitted teemperature range:
– storage
– operation
– medium
Protection class as per
EN 60 529
Relative humidity
Corrosion protection
Mounting position
Tightening torques
Fastening for fitting on feet
Hat rail clamping unit
Locking screw for IC connection
Components on valve locations
Components on end plates
Tie rod
Materials
plates, cover:
valve plate:
seal:
Oscillation
(as per DIN/IEC 68 part 2–6)
– Transport:
– operation:
Shock:
(as per DIN/IEC 68 part 2–27)
A-4
- 20
- 5
- 5
IP 65 (with cable from FESTO accessories)
90 % at 20
against industrial climate (as per FN940070)
As desired
0.8 Nm
1.3 Nm
0.2 Nm
CPA14: 0.2 Nm (+ 0.05 Nm)
CPA14: 0.3 Nm (+ 0.1 Nm)
0.7 Nm (+/- 0.1 Nm)
1st. stage 0.5 Nm (CPA10/CPA14)
2nd. stage 1.5 Nm (CPA10) or 2.0 Nm (CPA14)
PPS, PA6T/X-GF40
AL-DD, PPS, ST, AL
NBR
3.5 mm travel at 2 - 9 Hz
1g acceleration at 60 - 200 Hz
Only for wall fitting:
0.35 mm travel at 10 - 60 Hz
5g acceleration at 60 - 150 Hz
Only for wall fitting
30 g acceleration at 11 ms duration
The valves can be used at temperatures down to -5 C.
In order to prevent the condensate from freezing and to
avoid humidity we recommnd that you use a drier. With
this you can remove the condensate and the humidity.
o
o
to + 40
C
o
o
to + 50
C
o
o
to + 50
C
o
C or 40 % at 50
o
C
CPA... 9805NH
Advertisement
Table of Contents
