Festo CPA VI Series Manual page 46

3. Installation
3-12
2. Check to see if the seal of the pin-type insert is
greased. If necessary, grease the seal with Festo F2
or Esso Beacon grease.
3. Press the pin-type inserts into the connecting holes.
4. Check to see if the pin-type inserts are seated as far
as possible in the holes. To do this, measure the
distance between the connection level and the lock-
ing ring of the pin-type inserts (see diagram).
5.5 mm (CPA10) resp. 6.5 mm (CPA14)
Fig. 3/6: Checking the pin-type fitting
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA A
AAAA AAAA AAAA AAAA A A
AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA A A
AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA A
AAAA AAAA AAAA AAAA A A
AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA A A
AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA A A
AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA A A
AAAA AAAA AAAA AAAA
AAAA AAAA AAAA AAAA A A
AAAA AAAA AAAA AAAA
CPA... 9808A