Fitting Onto A Hat Rail - Festo CPA VI Series Manual

2. Fitting

2.1.2 Fitting onto a hat rail

CPA... 9808A
In order to fit the CPA valve terminal onto a hat rail you
will require mounting kit CPA10/14-BG-NRH. This kit
consists of two M4x10 screws and two clamping el-
ements.
Proceed as follows:
1. Make sure that the mounting surface can support
the CPA valve terminal.
2. Fit the hat rail (support rail EN 50022 - 35x7.5; width
35 mm, height 7.5 mm). Make sure there is sufficient
space for connecting the supply cables and pneu-
matic tubing.
3. Fasten the hat rail to the mounting surface approxi-
mately every 100 mm.
2-5