Festo CPA VI Series Manual page 14

Term
Components
Electrical bridge
Electrical sub-base
End plate
HHB
I/O
Manifold base
Pin type
Pin type with inner
thread
Reserve plate
Sub-base
Tubing
Valve plate
XII
Meaning
Common term for pneumatic sub-bases, valve plates, additional
pressure supply plates, reserve plates, end plates,
electrical sub-bases (with IC, MP, CP or AS-i connections), electrical
manifold bases, sub-bases, end plate covers, silencers.
Conducts the supply voltage from the manifold base to the solenoid
coils on CPA valve terminals with MP, CP or AS-i connections.
Block with multipin, CP or AS-i connection
Outer left and right hand end plates of the CPA valve terminal
with connections for supplying the valves with compressed air
and for conducting the exhaust air, as well as for connecting silencers.
Manual override
Input/output modules
Block for electrical linking of the valve solenoid coils with the
electrical sub-base.
Plug connector (with/without inner thread) for connecting the supply
cables to the CPA valve terminal.
Pin-type adapter for connecting the supply tubing with QS screw
connectors.
Plate without valve function, for reserving valve locations.
Pneumatic manifold base with open or closed
compressed air channel for single solenoid, double solenoid or mid-
position valves with work connections 2 and 4.
Connects the supply lines (tubing) to the CPA valve terminal
Plate with single solenoid valve, double solenoid valve or mid-psition
valve
CPA.. 9808A