Festo CPA VI Series Manual page 74

Compact performance valve terminal pneumatics

Hide thumbs Also See for CPA VI Series:

Table of Contents

5. Maintenance and conversion

5-6

Loosening the CPA valve terminal fitted onto a hat

rail

1. Loosen the locking screw of the hat rail clamping

unit on the left and right hand end plates (see diag-

ram). Make sure that the clamping element lies hori-

zontal to the hat rail.

2. Swing the CPA valve terminal forwards from the hat

rail (see diagram, arrow A).

3. Lift the CPA valve terminal out of the hat rail (see

diagram, arrow B).

AAAA

Hat rail

Clamping element

Locking screw

Fig. 5/1: Dismantling the CPA valve terminal

AAAA

CPA... 9808A

Table of Contents