IBM 5280 Manual page 186

B
1
DISKETTE MAP
INTER LED
PAGE 2 OF
002
If a diskette works correctly in
one diskette drive, but has too
many errors or does not work at
all in another drive, this type
of failure is probably a
'Diskette Interchange' problem.
See MIM 963 for a description of
other Media problems.
Did you enter this MAP because you
suspect a diskette or interchange
problem?
Y N
003
GO TO MAP 2000, ENTRY POINT A.
004
Does the diskette(s) fail in more
than one drive.
Y N
I
,
005
Can the System be IPL'ed?
Y N
4
006
Do the Drive Band service
check (Diskette MIM 361) and
the Head/Carriage service
check (Diskette MIM 337) on
the drive you are having
problems with.
Was a problem observed when
performing these service
checks?
Y N
007
Defective Head/Carriage
assembly (Diskette MIM
341).
C D E
D E MAP 22S0-2
OOS
Load and run 'SYSTEST' to test
the drive you were having
problems with (MIM 975).
Are you still having problems
with the drive?
Y N
009
010
End of call. Return the
system to the customer in
its original configuration.
- Defective Head/Carriage
assembly (Diskette MIM
34l)~
011
- IPL the system with Diagnostic
Diskette 1.
- Load 'DCP' and run MDI 2060 to
test the failing drive. Be sure
to use a known good scratch
diskette.
Did the drive fail when running
this MDI?
Y N
012
- Load and run 'TMEDIA' to test
the diskette(s) you are having
problems with (MIM 971).
Did the diskette(s) fail when
running this test?
Y N
3 3 3
F G H
ECS40S74
MAP 2280-2