IBM 5280 Manual page 187

F G H
222
DISKETTE MAP
INTER LED
PAGE
3 OF 8
013
014
Do the Drive Band service
check (Diskette MIM 361) and
the Head/Carriage service
check (Diskette MIM 337) on
the drive you are naving
problems with.
If the problem occurs again,
replace the Head/Carriage
assembly (Diskette MIM 341).
Initialize the diskette(s) you
are having problems with. Run
'TMEDIA' again and test the
diskette(s) (MIM 971).
Did the diskette(s) fail when
running this test?
Y N
015
016
Suspect that the heads
worn or that
Head/Carriage is out
alignment on the drive
wrote the diskette.
are
the
of
that
Defective Diskette(s), advise
the customer to take these
diskette(s) out of service.
017
Was a Read problem encountered?
Y N
018
- The problem is not an
interchange problem,
GO TO MAP 2000, ENTRY POINT A.
J
J MAP 2280-3
019
Do the Drive Band service check
the
check
drive
(Diskette MIM 361) and
Head/Carriage service
(Diskette MIM 337) on the
- . - --
,~-
_ . .! __ __ __. _ _
l_" _
~_
_ ..
.:.&..
1-
you
d
r-
~ rJ d V I I
J
~
I-' r ..........
\;;;"1/1;;> ... I . . . . .
- Load 'DCP' and run MDI 2060
again to test the failing drive.
Be sure to use another known
good scratch diskette.
Did the drive fail when running
this MDI?
Y N
020
Load and run 'SYSTEST' to test
the drive you were having
problems with (MIM 975).
Are you still having problems
with the drive?
Y N
021
- End of call. Return the
system to the customer in
its original configuration.
If the problem occurs again,
replace the Head/Carriage
assembly (Diskette MIM 341).
022
If Read errors occur, replace
the Head/Carriage assembly
(diskette MIM 341). If other
errors occur,
GO TO MAP 2000, ENTRY POINT A.
023
- Defective Head/Carriage assembly
(Diskette MIM 341).
EC840874
~1AP 2280-3