Diskette Entry - IBM 5280 Manual

L M
6 6
036
DISKETTE MAP
DISKETTE ENTRY MAP
PAGE S OF
9
(ENTRY POINT C)
MAP 2000-S
- Locate the Error Code in the table, locate the correct
Note Letter(s) and look to the RIGHT to find the comments.
------------------------Error Code Table--------------------------
ERROR INOTES *************NOTES*****************
CODECs)
--------------+-----
0133/0731 K,L
3151/3251 R,N
3201/3212/3272 A,N
A -Write/Erase mis-match error.
B -Write verify error.
C -Storage overrun error.
D -Missing address mark.
E -Missing data address mark.
F -Missing sector.
A,K,L G -Seek error.
H -Data CRC error.
C,K,L
J
-ID field CRC error.
D,N
F,Q,N
G,N
J,Q,M
E,S,N
T,Q,P
K -Defective Diskette/Main MPU card CA-Cl)
(MIM 303).
L -If a 'Ros Patch' cable is connected to
the card, GO TO MAP 0600, ENTRY POINT A
M -GO TO MAP 22S0, ENTRY POINT B.
N -GO TO MAP 2010, ENTRY POINT A.
P -GO TO MAP 22S0, ENTRY POINT A."
Q -Suspect a defective diskette.
R -Diskette drive Dropped Ready. CHECK:
The diskette, to ensure it is correct
for the type of drive it ;s installed
in, and the Locking Lever is Closed.
Reseat the Diskette I/O cables.
S -Suspect the diskette drive that wrote
the diskette. Check for a write failure
T -Initialization problem, re-initialize
the diskette in another diskette drive.
- If the error code that is displayed ;s not ;n the table
GO TO PAGE 6, STEP 01S,
ENTRY POINT B.
037
GO TO MAP 2010, ENTRY POINT A.
EC840874
MAP 2000-8