Replacing The Measurement Window - Thermo Scientific NITON XL3t 500 User Manual

Routine Maintenance Guidelines

Replacing the Measurement Window

Replacing the
Measurement
Window
2-6 NITON XL3 Analyzer User's Guide
1. Remove the two Phillips head screws.
Figure 2-5. View of Face Plate and measurement window
2. Remove the face plate and place it face down.
Figure 2-6. Face Plate Removed showing measurement window on
Reverse
3. Remove the old measurement window.
4. Clean the back surface of the face plate and install the new
Window.
Thermo Scientific