Activating The Technology Extension In The Drive Object - Siemens SINAMICS RAILCTRL Function Manual

Installation and activation
4.2 Installing using STARTER or SIMOTION SCOUT
The version data between the "Version (offline)" and "Version (online)" columns may differ.
When you download the technology package, the version in the target device is always
overwritten.
4.2.4

Activating the Technology Extension in the drive object

In the following, the Technology Extension is assigned to a drive object.
Requirements
1. A project matching the device is open.
2. The corresponding drive axes have been created in the project.
3. The STARTER commissioning tool is in the OFFLINE mode.
Procedure
To activate the Technology Extension in the drive object, proceed as follows:
1. In the project navigator, select the drive object for which the functionality is required (e.g.
SERVO_03).
2. Select "Properties" in the shortcut menu.
3. To activate the Technology Extension, select check box "ABC_OA" on the "Technology
packages" tab.
Figure 4-3
22
Object properties
Function Manual, 09/2019, A5E38120767B
RAILCTRL