Commissioning The Railctrl Technology Extension - Siemens SINAMICS RAILCTRL Function Manual

4. Click on "OK".
Note
If multiple versions of a Technology Extension are installed in STARTER, select the required
version, see "Download the technology package for the new version (Page 26)".
5. Open the expert list of the drive object.
The additional parameters of the installed Technology Extension must now be visible in the
expert list of the corresponding drive object.
Figure 4-4
6. To activate the Technology Extension for the drive object, perform the project download.
Set the mode to ONLINE and select "Download Project to Target System".
4.2.5

Commissioning the RAILCTRL Technology Extension

To commission the RAILCTRL Technology Extension, appropriately set the additional
parameters in the expert list of the STARTER commissioning tool.
For the RAILCTRL Technology Extension, parameters starting at p30450 are available, see
"Parameter (Page 57)".
The commissioning is described in detail in Chapter "Commissioning (Page 43)".
RAILCTRL
Function Manual, 09/2019, A5E38120767B
Expert list
4.2 Installing using STARTER or SIMOTION SCOUT
Installation and activation
23