D.1 General Terms And Conditions For The Use Of Software For Sinumerik And Drive Technology - Siemens Sinumerik 802D sl Instruction Manual

SINUMERIK 802D sl License Agreement
License Agreement for the Sinumerik 802D sl Software – in the following referred to as
"Software"
D.1 General Terms and Conditions for the Use of Software for
Sinumerik and Drive Technology
This Software is protected by national and international copyright and treaties. Unauthorized
copying and illegal distribution of the Software or parts thereof is liable to prosecution both
under criminal and under civil law and will result in severe penalty and/or damage compen-
sation.
Prior to installation and use of the Software, please read the Terms and Conditions of this
License Agreement. An extract can be found in the Section D.2.
If you have received this software on a CD with the notice "Trial version" or together with
another software licensed for you, you are only permitted to use the software for test and
validation purposes according to the attached trial licensing regulations. To this end, it is
imperative to install certain programs, software libraries etc. on your computer.
We therefore strictly recommend you to install the Software either on a single-user
workstation or on a computer which is not integrated into the production process
and required for storing or managing vital data, since it cannot fully be ruled out that
existing files are modified or overwritten. We will therefore not assume any liability
for damage and/or data loss resulting from installing the program or not observing
this warning notice.
Any use of this Software other than that as prescribed by the present Terms and
Conditions is only permitted with a valid license from Siemens. If you do not possess
a valid license which can be proven by submitting an appropriate Certificate of
License/Software Product Form, please cancel the installation immediately and
contact a Siemens branch office immediately to avoid claims for damages.
If the Software contains Free Software, an appropriate note can be found in the readme file
for the Software under License. The Customer is entitled to use the Free Software according
to the relevant terms and conditions of licensing applying to the Free Software. These are
included on the data carrier on which the software is supplied to the Customer. If there are
any provisions in the terms and conditions of licensing for the Free Software which are in
contradiction to these General Terms and Conditions, the terms and conditions of licensing
for the Free Software shall prevail. The Customer shall be entitled to request the source
code of the Free Software against payment of the shipping costs at least for a time of three
years after acquiring the Software from Siemens.
Siemens Automation Parts
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
D
D-243