Upgrading Using Starter Or Simotion Scout; Preconditions For Upgrading Using Starter Or Simotion Scout - Siemens SINAMICS RAILCTRL Function Manual

Installation and activation

4.3 Upgrading using STARTER or SIMOTION SCOUT

4.3 Upgrading using STARTER or SIMOTION SCOUT
4.3.1

Preconditions for upgrading using STARTER or SIMOTION SCOUT

Note
The description in this chapter refers to the fictitious Technology Extension "ABC_OA". This is
to be upgraded from version V1.1 to V1.2.
The procedure described in this chapter can be correspondingly applied to any real Technology
Extension.
This description for upgrading a Technology Extension is applicable for the STARTER
commissioning tool and for engineering software with integrated STARTER (e.g.
SIMOTION SCOUT).
Generally, the term STARTER is used hereafter.
Devices
This description is applicable for SINAMICS S120 (CU320-2) and SIMOTION D4x5-2 with
SINAMICS Integrated.
Requirements
1. The OA Support Package "oasp_abc_oa_v1_1_1_oaif04402300.zip" has already been
installed and assigned to the required drive objects, see "Installing using STARTER or
SIMOTION SCOUT (Page 18)".
2. The file for the OA Support Package "oasp_abc_oa_v1_2_oaif04402300.zip" must be
located in a known directory.
The file name for the OA Support Package comprises the following elements:
– oasp = OA Support Package
– abc_oa = name of the Technology Extension
– v1_2 = version of the Technology Extension
– oaif04402300 = OA interface version
24
Version of the SINAMICS firmware from which this Technology Extension can be used
(04402300 = V4.4).
Function Manual, 09/2019, A5E38120767B
RAILCTRL