General Information About Sinamics Documentation - Siemens SINAMICS RAILCTRL Function Manual

Introduction

1.2 General information about SINAMICS documentation

1.2 General information about SINAMICS documentation
SINAMICS documentation
The SINAMICS documentation is organized in the following categories:
● General documentation/catalogs
● User documentation
● Manufacturer/service documentation
Standard scope
The scope of the functionality described in this document can differ from that of the drive system
that is actually supplied.
● Other functions not described in this documentation might be able to be executed in the
drive system. However, no claim can be made regarding the availability of these functions
when the equipment is first supplied or in the event of service.
● The documentation can also contain descriptions of functions that are not available in a
particular product version of the drive system. Please refer to the ordering documentation
only for the functionality of the supplied drive system.
● Extensions or changes made by the machine manufacturer must be documented by the
machine manufacturer.
For reasons of clarity, this documentation does not contain all of the detailed information on all
of the product types, and cannot take into consideration every conceivable type of installation,
operation and service/maintenance.
Target group
This documentation is intended for machine manufacturers, commissioning engineers, and
service personnel who use the SINAMICS drive system.
Benefits
This manual provides all of the information, procedures and operator actions required for the
particular usage phase.
Siemens MySupport/Documentation
You can find information on how to create your own individual documentation based on
Siemens content and adapt it for your own machine documentation at the following address
(https://support.industry.siemens.com/My/ww/en/documentation).
6
Function Manual, 09/2019, A5E38120767B
RAILCTRL