Smile-B3 Installation - Alpha ESS Storion-SMILE-B3 Installation & Operation Manual

`
2.4.3

SMILE-B3 Installation

Step 1: Take out Storion- SMILE-B3 from the packaging box, as shown in Figure 2.6
Step 2: first use the percussion drill (M10 drill) to drill holes in the wall with depth 65mm, then
install and place the stand.(1. Insert the expansion pipe into the drilled hole. Then pass the
tapping screw through the spacer and tighten it with the cross screwdriver), as shown in Figure
2.7.
___________________________________________________________________
Installation
Figure 2.6 Open Storion-SMILE-B3 Packaging
Figure 2.7 Stand Positioning
Alpha ESS Co., Ltd.
Your Smart Energy
.
Page 15 of 46