Alpha ESS Storion-SMILE-B3 Installation & Operation Manual page 34

`
Your Smart Energy
Step 7: Click the "Enter" button and the
address setting is completed.
Step 9: Click the "SET" button again to enter
the save interface:
2.4.5.5.2 ACR10R
Step 1: This is the initial interface of the meter,
click the "Set" button;
___________________________________________________________________
Page 32 of 46
Installation
Step 8: Click the "SET" button to enter the
following interface:
Step 10: Click the "Enter" button to enter the
following interface, press the up and down arrow
keys, and set "no" to "YES" to save the
configuration.
Step 11: Click the "Enter" button and the setting
ends.
Step 2: Click the "SETUP" button;
Alpha ESS Co., Ltd.