Mounting The Smile-G3-Bat-10.1P And Inverter - Alpha ESS SMILE-G3-S5 Manual

21
6.3 Mounting the SMILE-G3-BAT-10.1P and
Inverter
6.3.1 Mounting the battery pack
1. Lift the battery pack by using the handles at the two sides, take it out from the
package carton. Do not put the battery pack upside down on the ground.
2. Place the battery positioning paper plate on the wall and stick the bottom to the
floor, and mark the positions of the two drill holes.
3. Drill 2 holes on the wall with a diameter of 10mm and a depth of about 70mm.
MOUNTING