Table of Contents
Advertisement
`
Your Smart Energy
Step 3: install the box of Storion-SMILE-B3 (hold the two handles on the back of B3 and install
the B3 box to the stand), as shown in Figure 2.8.
Figure 2.9 Take Down Storion-SMILE-B3 Upper Cover Plate
Step 4: Use the M5 internal hexagon wrench to unscrew the screws. After pulling out the
connecting wire harness on the back of the upper cover plate, remove the B3 upper cover plate
to prepare wiring, as shown in Figure 2.9.
Note: the internal 63A and the external 80A switch must be switched off to prevent
short circuit.
___________________________________________________________________
Page 16 of 46
Installation
Figure 2.8 Box Fixation
Alpha ESS Co., Ltd.
In any case, the first step
after unpacking is turning off
the switch of 63A and 80A.
Hide quick links:
Advertisement
Table of Contents
