Table of Contents
Advertisement
`
Step 5: the earthing bonding position for Storion-SMILE-B3 is as shown in Figure 2.10, please
use the M4*12 screw.
Step 6: Connect Backup and Grid wire harness (to 6 pin terminal strip), as shown in Figure 2.11.
Note: in Australia, the neutral of backup and grid circuit should be externally
connected on the neutral bar.
The suggested torque for the waterproof contact is 3.75 N.m±10%.
___________________________________________________________________
Installation
Figure 2.10 Earthing Bonding Position
Figure 2.11 Backup and Grid Wire Harness Wiring
Alpha ESS Co., Ltd.
Your Smart Energy
Page 17 of 46
Hide quick links:
Advertisement
Table of Contents
