Uninstallation & Return; Removing The Product; Packing The Product; Disposing Of The Product - Alpha ESS SMILE-T10-HV Installation Manual

UNINSTALLATION & RETURN
11 Uninstallation & Return

11.1 Removing the Product

Procedure
Step 1 Power off the product by following the instructions in section 9.3 Powering
Off the Product.
Step 2 Disconnect all cables from the product, including communication cables,
PV power cables, battery cables, AC cables, and PE cables.
Step 3 Remove the WiFi module from the inverter.
Step 4 Remove the inverter from the mounting bracket.
Remove the Battery pack from the mounting bracket.
Step 5 Remove the mounting bracket.

11.2 Packing the Product

If the original packaging is available, put the battery pack or inverter inside it and then seal
it using adhesive tape.
If the original packaging is not available, put the battery pack or inverter inside a suitable
cardboard box and seal it properly.

11.3 Disposing of the Product

If the battery pack or inverter service life expires, dispose of it
according to the local disposal rules for electrical equipment and
electronic component waste.
Dispose of the packaging and replaced parts according to the
rules at the installation site where the device is installed.
Do not dispose the inverter and the battery pack with normal
domestic waste.
56 57
12 Specification

12.1 Datasheet of Hybrid Inverter SMILE-T10-HV-INV

Item
Input DC (PV side)
Recommended max.
PV power
Max. PV input voltage
Rated voltage
Start-up voltage
MPPT voltage range
Max. input current
Max. short circuit
current
Inverter max. backfeed
current to the array
MPPT number/Max input
strings number
Battery
Battery Type
Battery Voltage range
Maximum Charging
Power
Maximum Charge/
discharge current
Communication
Output AC (Back-up)
Rated output power
Max. apparent output
power
Back-up switch time
Rated output voltage
Rated frequency
Rated output current
THDv(@linear load)
Input AC (Grid side)
Rated Input voltage
range
Frequency range
Rated input power
SMILE-T10-HV-INV (OUTDOOR) SMILE-T10-HV-INV (INDOOR)
16000 W
1000 V
600 V
160 V
200 ~ 850 V
26 A / 26 A
39A / 39 A
0 A
2 / 4
Li-ion
240 ~ 288 V
10 kW
40 A / 40 A
CAN
10 kW
10 kVA
<10 ms
L1/ L2/ L3/N/PE, 220/380 V, 230/400 V
50/60 HZ
16.7 A
2%
L1/ L2/ L3/N/PE, 220/380 V, 230/400 V
45~55 Hz / 55~65 Hz
15 kW

SPECIFICATION