Convotherm 4 Series Installation Manual page 87

6 Installation
Escaping gas
Risk of explosion from escaping gas
Escaping gas can ignite and cause an explosion.
Install a gas shut-off device close to the appliance.
Make certain that the gas supply is disconnected before starting work on the gas installation.
After connecting to the gas supply and any subsequent operation on gas-carrying components,
always check for leaks at every connection point and supply point to gas-carrying components.
Ensure that all the specified points inside and outside the appliance are gastight before putting the
combi oven into service.
For table-top units on a wheeled platform with flexible supply pipe, to ensure that the appliance is
secured in place, make sure that the retaining device which restricts the range of movement of the
platform plus appliance is connected.
87