Convotherm 4 Series Installation Manual page 39

3 For your safety
Position and function (floor-standing units)
The following illustration shows a size 20.20 electric combi oven as an example of all floor-standing
units:
Item Safety device
Cover can only be re‐
1
moved using tool
Operating panel can
2
only be removed using
a tool
Appliance door with
3
magnetic door switch
Function
Prevents live parts from be‐
■
ing touched accidentally
Prevents access to the
■
moving fan from the wiring
compartment
Prevents live parts from being
touched accidentally
Appliance door:
Protects the user and outside
environment from hot steam
Magnetic door switch (electri‐
cal door sensor):
When the appliance door is
■
opened, the switch stops:
rotation of the fan wheel
■
(comes to a stop after a
few seconds)
operation of the heating
■
element
Distribution of the clean‐
■
ing agents by the fully au‐
tomatic oven cleaning
system
Prompt to close the appli‐
■
ance door
39
Check
Check that the cover is in
place
Ensure that the operating
panel is in place
Check the door pane regularly
for scratches, cracks, indenta‐
tions etc. and replace it if any
are found
Check magnetic door switch
at low temperature
Action:
Open the appliance door
■
fully
Press Start
■
Result:
Motor must not start up.