3 For your safety
Safety hazard: gas
Danger
Explosion hazard from
gas
Safety hazard: mechanical parts of the appliance
Danger
Risk of cuts from sharp
edges
Safety hazard: cleaning agent
Danger
Risk of chemical burns
or irritation to skin, eyes
and respiratory system
from contact with clean‐
ing agents and their
fumes
Where or in what situations does the
hazard arise?
If gas pipes are leaking
■
If the customer's gas tap is
■
opened before the gas connection
has been fully installed
Where or in what situations does the
hazard arise?
When handling sheet-metal parts
Where or in what situations does the
hazard arise?
When fitting the cleaning system
When corrosive cleaning agents are
used
30
Preventive action
The gas supply must be connected
solely by certified gas installation en‐
gineers from an authorized service
company
Install gas shut-off device close to
appliance
For table-top units on a wheeled
platform and with a flexible connec‐
tion pipe:
In order to secure the appliance in
■
place, make sure that the retaining
device which restricts the range of
movement of the platform plus ap‐
pliance is connected
After connecting to the gas supply
■
and after any subsequent opera‐
tion on gas components, always
leak-test every connection and
supply point for the gas compo‐
nents to ensure they are gastight.
Ensure that all the specified points
■
inside and outside the appliance
are gastight before putting the
combi oven into service.
Preventive action
Exercise caution when performing
■
these tasks
Wear personal protective equip‐
■
ment
Preventive action
Wear personal protective equip‐
■
ment
Observe the labels on the cleaning
■
agents and the relevant safety da‐
tasheets
Only use those cleaning agents that
are specified under 'Cleaning
agents' in the 'Cleaning procedures'
chapter of the user manual
Need help?
Do you have a question about the 4 Series and is the answer not in the manual?
Questions and answers