Mounting The Terminal - Raven SBGuidance Auto Installation Manual

SBGuidance Auto I Rev. A I Claas ATP Ready

6. Mounting the terminal

The terminal can be mounted with a supplied RAM-
D/RAM-C pipe bracket on a Claas ATP Ready tractor.
(Figure 16).
The following orders are presented for mounting the
Terminal:
Always contact the customer about the terminal
•
position in the cabin.
• Always use a RAM-D or RAM-C ball attachment.
Mount the terminal free of vibrations with a
•
solid bracket. A variety of mounting brackets are
available for this purpose.
Conceal all cables in one pillar (e.g. A-pillar or B-
•
pillar).
• Mount in such a way that the display is directed
straight towards the driver.
Mount in such a way that driver has a clear view
•
all around
Tip!:
Mount the terminal in such a way that it does not
obstruct the view of the driver over the top of the
right-hand fender, but also so that the inside of the
front wheel on the ground is still clearly visible.
Figure 16 Mounted pipe bracket.
Pag 25/33 I SBG-Claas ATP Ready-IM-EN-Rev. A