Mounting The Radio Antenna - Raven SBGuidance Auto Installation Manual

SBGuidance Auto I Rev. A I Claas ATP Ready

4.3. Mounting the radio antenna

Figure 11 shows the standard radio antenna with
magnetic base. Preferably, this standard antenna
should be used. The components of this standard
antenna are shown in Table 1.
Table 1 Standard parts for radio antenna
Symbol Description
1 Radio antenna
2
Antenna lead
3 Connector to terminal
4 Magnetic base
A number of specific conditions should be met before
installing and mounting the radio antenna:
• Preferably mount the radio antenna with the
magnetic base on the standard GPS antenna
bracket.
Do not mount the radio antenna next to a steel
•
construction, but above it.
Mount magnetic base on a sufficiently large
•
steel surface (at least the size of the standard
GPS antenna bracket). A larger steel base surface
can improve signal strength and prevent
problems, especially at greater distances (> 9
km).
Label the antenna cable inside the cabin with
•
label 'Radio'.
1
4
Figure 11 Radio antenna components.
Pag 19/33 I SBG-Claas ATP Ready-IM-EN-Rev. A
2
3